2CV Rebuild 21

The white plastic brake rod bulkhead fitting

Feb 10 2016 001

First wiring diagram…this is all new toggle switches on the dash with additional functions Feb 10 2016 015

The re wrapped original rear wiring loom…note where it has to go down a very narrow channel by the front screen. Getting it down there took a few attempts! Feb 10 2016 012

 

Rear loom where it pokes through the bulkhead

Feb 10 2016 011

Inside bottom of passenger’s door with the old trim grip removed

Feb 10 2016 010

Here I’ve just placed the repair section on the door

Feb 10 2016 009

Boot lid and air vent flaps

Feb 10 2016 008

Reinstalled master cylinder with new pipework. Note also the lovely new cast exhaust clamps

Feb 10 2016 007

Buzz bar type fuse boxes note the LED light glow when a fuse has blown or is missing! See http://www.holden.co.uk/displayproduct.asp?pCode=080.964

Feb 10 2016 006

New rubber grommet on the gear change linkage.

Feb 10 2016 005

Chrome 5 3/4 light see http://www.holden.co.uk/displayproduct.asp?pCode=010.259

Lights – Front view one wired up the other to do. Note also the temporary starter switch on the battery.

Feb 10 2016 002 Feb 10 2016 003